Friday, February 1, 2019

2007, 2008, 2009, 2010 GMC Yukon Keyless Remote Programming Instructions

This keyless remote programming instructions work for 4B remote with part # 25830632, 22756460, 15857835, FCC id OUC60270, OUC60221 on the back of it.

Put the key in the ignition and turn it to ON position. (Don't start the engine) so you can access the (DIC)

This display allows you to match Remote Keyless Entry (RKE) transmitters to our vehicle. To match an RKE transmitter to your vehicle:

1. Press the vehicle information button until the "Press (check) to reprogram a remote" displays.
2. Press the set/reset button until the Remote Programming Active is displayed.

3. Press and hold LOCK and UNLOCK on the remote simultaneously for 15 seconds. On vehicles with the memory recall seats, the first remote programmed will be driver 1 and the second will be driver 2 and so on. You'll hear a chrime which indicates the remote has been programmed.
4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK/OFF.

No comments:

Post a Comment