Friday, February 1, 2019

2007, 2008, 2009, 2010 GMC Yukon Keyless Remote Programming Instructions

This keyless remote programming instructions work for 4B remote with part # 22951510, 22756462, 20869057, 15857840, FCC id OUC60270 and OUC60221 on the back of it.

Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC)

This display allows you to match Remote Keyless Entry (RKE) transmitters to our vehicle. To match an RKE transmitter to your vehicle:

1. Press the vehicle information button until PRESS (check) TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until the REMOTE KEY LEARNING ACTIVE is displayed.

3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with the memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.

4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.

5. To exit the programming mode, you must cycle the key to LOCK/OFF.

No comments:

Post a Comment