Tuesday, November 20, 2018

2007, 2008, 2009 Mazda 3 Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # BAN6-675RY, 4238A-41525, FCC id KPU41794, and part # Model 41794 on the back of it.

Replacement Remote BAN6-675RY, 4238A-41525, KPU41794, 41794
Replacement Remote
STEPS:

1. Remove key from ignition
2. Close all doors.
3. Open driver’s door. Perform steps 4-6 within 24 seconds.

4. Put the key in the ignition and turn it to ON then back to LOCK position
three times
5. Close and open the door 3 times
6. Door locks should cycle (lock then unlock). It not, wait for 40 seconds and
start from the top.

7. Press UNLOCK button of each keyless remote to be programmed twice, door locks should lock and unlock after each remote is programmed. (If door locks do not lock and unlock proceed as follows: Close and open driver’s door once, door should lock and unlock twice. If door locks do not lock and unlock, go back to step 3).
8. Exit vehicle and test remote(s)

No comments:

Post a Comment

Share