Tuesday, November 6, 2018

2003, 2004, 2005 Kia Sedona Keyless Remote Programming Instructions

This keyless remote programming instructions work for panic is red button white icon remote with part # 0K58A-677T0, FCC id PLNBONTEC-T009 on back on the back of it.

Replacement Remote 0K58A-677T0, PLNBONTEC-T009
Replacement Remote
1. Jumper terminal 12 and 16 of the Diagnostic Connect (Check the diagram below) found in the engine compartment adjacent to the battery.
2. Put the key in the ignition then turn it to ON position (Don't start the engine).
3. Press LOCK button on the remote twice.
4. Repeat step 3 for another remote.
5. Turn the ignition to OFF position and take the key out.
6. Disconnect the jumper wire from diagnostic connector.
7. Test remote(s).


No comments:

Post a Comment

Share