Friday, November 9, 2018

2001, 2002, 2003, 2004, 2005 Chevrolet Impala Keyless Remote Programming Instructions

This keyless remote programming instructions work for used to be 2300, 2301, 2310, 2311, 2235, 2236, 2080, 2020, 1070 remote with part # 25695954, 25695955, 25695966, 25695967, 15184352, 15184353, 15752330, 15043458, 10443537 FCC id KOBLEAR1XT on the back of it.

Replacement Remote  25695954, 25695955, 25695966, 25695967, 15184352, 15184353, 15752330, 15043458, 10443537, KOBLEAR1XT
Replacement Remote 
NOTE: You existing remotes will be removed from the system's memory after programming a new one. So, just reprogram these remotes if you wish to use them.

1. Insert the key and turn it to ON or ACC position and turn the radio off. Press and hold the DISP button on the radio for 5 seconds until SETTINGS is displayed. Using SEEK up or down arrow keys, scroll until FOB PROG shows up on the display. Press PREV or NEXT button to enter lower menu. Begin will be displayed.
2. Press DISP button to start programming. When the PUSH FOB message flashes, press and hold LOCK and UNLOCK button on the transmitter for 15 seconds. You'll hear a chime once the remote has been successfully programmed.
3. To program another transmitter just go back to step 2 including previously programmed remotes.
4. Scroll until EXIT appears in display. Press DISP button to exit programming mode then you'll hear a chime once as a confirmation the system has left the programming mode.

No comments:

Post a Comment

Share