Friday, November 16, 2018

1998, 1999, 2000, 2001, 2002, 2003, 2004 Isuzu Rodeo Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # 8-97149-392-0, FCC id HYQ1512R on the back of it.

Replacement Remote 8-97149-392-0,  HYQ1512R
Replacement Remote
Perform steps below to program your remote(s).
1. Leave the driver's door open.
2. Enter the key in the ignition (don't touch it yet).
3. Within 5 seconds, twist the key in the ignition to ACC position and then to LOCK 3 times within 3 seconds.
4. In 10 seconds close and open the driver door twice.
5. Turn the key in the ignition to ACC and then to LOCK 3 times within 3 seconds.
6. In 10 seconds close then open the door again. This time your system will enter the programming mode and it cycles (lock then unlock) the door locks as it's indication.
7. Within 15 seconds press LOCK on the remote. Door locks cycle.
8. Within 15 seconds press UNLOCK on the remote. Door locks cycle again.
9. To program another remote you will need to perform all steps from step 1.
10. Remove your key from the ignition and your system will exit programming mode.

No comments:

Post a Comment

Share