This keyless remote programming instructions work for 4B remote with part # 16245100, rear2x 16245104, trunk 16245100-29, 16207901-5, FCC id AB01502T on the back of it.
2. Remove the RADIO fuse.
3. Cycle the ignition switch from the OFF position tot he RUN position (as far as you can go without cranking the engine) 3 times within 5 second ending in the RUN position. The vehicle will verify entry into the programming mode by locking then unlocking the door locks.
5. Repeat the previous step for each additional transmitter (including any existing transmitters). You may program up to 4 transmitters. This must be done before the RADIO fuse is reinstalled.
7. Replace the RADIO fuse. If at any time it is necessary to restart the procedure, turn the ignition OFF and proceed again with step number 1.