Thursday, November 22, 2018

1996, 1997, 1998, 1999, 2000 Mazda Millenia Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # TA17675DYA FCC id KPU41048 on the back of it.

Replacement Remote TA17675DYA, KPU41048
Replacement Remote
NOTE: Program all remote (including old ones) since the system will reset once it enters programming mode (See step 8).

1. Don't put any keys in the ignition.
2. Close all doors.
3. Leave the driver's door open.
4. Put the key in the ignition this time, turn it ON and back to OFF then remove it.
5. Repeat step 4 two more times. Make sure you remove key from ignition each time.
6. Push driver door frame button three times (black rubber button in driver door frame that tells whether the door is open or closed.) If you can’t find this button then open and close the door three times.
7. The door locks will cycle or a chime (or buzz) will sound to indicate the vehicle has
8. Push any button on the remote twice. A chime will sound or the door locks will cycle which means remote has been programmed. Push any button on each remote twice to program them (a maximum of 3).
9. To exit programming mode, wait 15 seconds or until you hear four chimes.

No comments:

Post a Comment

Share