Thursday, November 22, 2018

1995 Mazda Mx-3 Keyless Remote Programming Instructions

This keyless remote programming instructions work for 2B MAZDA SYMBOL remote with part #  FCC id GQ43VT7T on the back of it.

Replacement Remote GQ43VT7T
Replacement Remote
1. Remove key from ignition.
2. Close all doors.
3. Open driver’s door and leave it open.
4. Insert key in ignition, turn key to ON (as far as you can go without starting the engine) and OFF. Remove key from ignition.
5. Repeat step 4 two more times. Make sure you remove key from ignition each time.
6. Push driver door frame button three times (black rubber button in driver door frame that tells whether the door is open or closed.) If you can’t find this button then open and close the door three times.
7. The door locks will cycle or a chime (or buzz) will sound to indicate the vehicle has
8. Push any button on the remote twice. A chime will sound or the door locks will cycle which means remote has been programmed. Push any button on each remote twice to program them (a maximum of 3).
9. To exit programming mode, wait 15 seconds or until you hear four chimes.

No comments:

Post a Comment

Share