Thursday, November 22, 2018

1995 Mazda Millenia Keyless Remote Programming Instructions

This keyless remote programming instructions work for remote with FCC id KPU41012 on the back of it.

Replacement Remote KPU41012
Replacement Remote
Please Note: You will need to program all of your remote (including old ones) as the system will automatically reset once it has entered programming mode.

1. No keys in the ignition.
2. Close all doors.
3. Open the driver’s door and leave it open.
4. Put the key in the ignition, turn key to ON and OFF then remove it.
5. Repeat step 4 twice. Make sure you remove key from ignition each time.
6. Press the driver door frame button 3 times (black rubber button in driver door frame that tells whether the door is open or closed.) If can't find this button just open and close the door 3 times instead.
7. Door locks will cycle (lock then unlock) or a chime will sound which means system has is in program mode. If not, wait 40 seconds and start from the top.
8. All remotes need to be programmed at this time including old ones. Push any button on a remote two times. A chime will sound or the door locks will cycle to indicate that remote has been learned. Push any button on each additional remote two times to program them. You can program up to three remotes.
9. After all remotes are programmed wait 15 seconds or until you hear four chimes signaling success.

No comments:

Post a Comment