Wednesday, November 21, 2018

1995 Mazda 626 Keyless Remote Programming Instructions

This keyless remote programming instructions work for 2B MAZDA SYMBOL remote with FCC id GQ43VT7T on the back of it.

Replacement Remote GQ43VT7T
Replacement Remote
Please Note: You will need to program all of your remote (including old ones) as the system will automatically reset once it has entered programming mode.

1. No keys in the ignition.
2. Close all doors.
3. Open the driver’s door and leave it open.
4. Put the key in the ignition, turn key to ON and OFF then remove it.

5. Do step 4 twice. Make sure you remove key from ignition each time.
6. Press the driver door frame button 3 times (black rubber button in driver door frame that tells whether the door is open or closed.) If you don't have this button then open and close the door 3 times.
7. The door locks will cycle (lock then unlock) or a chime will sound which means system has entered the program mode. If not, wait 40 seconds and return to step 1.
8. Push any button on the remote twice. A chime will sound or the door locks will cycle which means remote has been programmed. Push any button on each remote twice to program them (a maximum of 3).
9. To exit programming mode, wait 15 seconds or until you hear four chimes.

No comments:

Post a Comment

Share