Saturday, November 24, 2018

1995, 1996, 1997 Suzuki Esteem Keyless Remote Programming Instructions

This keyless remote programming instructions work for 1B (RED LED) remote with part # p/n 99980-46060-002, FCC id H5O600-2 on the back of it.

Replacement Remote 99980-46060-002, H5O600-2
Replacement Remote
1. Flip the valet/overide switch (located under driver’s side dash) to the ON position.
2. With the key in the ignition turn the ignition to ON then OFF.
3. Flip the valet/override switch “OFF” then “ON, OFF, ON, OFF”. You will hear a siren chirp to confirm you are about to enter programming mode.
4. Turn the ignition “ON, OFF, ON, OFF”. You will hear another chirp to confirm that you are now in programming mode.
5. Push the green button on remote #1. Within 5 seconds push the green button on remote #2 (if any). You will hear chirps each time you program a remote.
6. After 5 seconds programming mode ends by itself.

No comments:

Post a Comment

Share