Sunday, November 11, 2018

1994, 1995, 1996, Oldsmobile Silhouette Keyless Remote Programming Instructions

This keyless remote programming instructions work for 3B remote with part # 10239766, 10286022, new 10274333 and FCC id ABO0203T on the back of it.

Replacement Remote 10239766, 10286022, 10274333, ABO0203T
Replacement Remote
1. Remove the glove box.
2. Insert the key in the ignition and turn it to ON position. (Don't start the engine)
3. Momentarily depress the "Program" switch on the Keyless Entry System which can be access accessed through a hole on top of the glove box. Your door locks will cycle (lock then unlock) once the system has entered the programming mode.
4. Within 10 seconds, press any button on the first transmitter to program it. The receiver shall then acknowledge successful programming by locking then unlocking the vehicle doors.
5. Within 10 seconds, repeat step 4 to program the next transmitter (if any, including your old one).
6. Wait 10 seconds after the last remote has been programmed and turn the key in the ignition to OFF.
7. Test all remote.

No comments:

Post a Comment

Share