Friday, November 2, 2018

1993, 1994, 1995, 1996 Nissan Altima Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # 999M2-F001S, FCC id KM0CA78720T on the back of it.

Replacement Remote 999M2-F001S, KM0CA78720T
Replacement Remote
IMPORTANT: Have all the remotes you want to program for the system on hand (including any existing remotes) prior to beginning the procedure. Find the alarm control module under the driver side dash (often behind the kick panel on the left) which is brown or manila colored.)

1. Sit inside the vehicle with the hood, trunk and all the doors and  windows closed.
2. Place the alarm console switch in ALARM OFF position.
3. Cycle the ignition key to “ON” (as far as you can go without cranking the engine) then back to “OFF” six times within 10 seconds, ending in the “OFF” position.
4. Move the alarm console switch from the ALARM OFF to the AUTO and back to the ALARM OFF position.
5. Press the LOCK/UNLOCK button on the remote ONE time.
6. To program additional remotes (AND re-program any existing remotes), repeat steps 4 and 5 for each additional remote.
7. To exit programming, open any door. Test transmitters for function.

No comments:

Post a Comment

Share