Thursday, November 22, 2018

1993, 1994, 1995 Mazda 929 Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with FCC id KPU41012 on the back of it.

Replacement Remote KPU41012
Replacement Remote
1. Remove key from ignition.
2. Close all doors.
3. Open driver’s door and leave it open.
4. Insert key in ignition, turn key to ON (as far as you can go without starting the
engine) and OFF. Remove key from ignition.
5. Do step 4 twice. Make sure you remove key from ignition each time.
6. Press the driver door frame button 3 times (black rubber button in driver door frame that tells whether the door is open or closed.) If you don't have this button then open and close the door 3 times.
7. The door locks will cycle (lock then unlock) or a chime will sound which means system has entered the program mode. If not, wait 40 seconds and return to step 1.
8. Push any button on the remote twice. Door locks will cycle or you'll hear a chime which means remote is programmed. Push any button on each remote twice to program them.
9. Wait 15 seconds or until you hear four chimes. This means the system will turn programming mode off itself.

No comments:

Post a Comment