Saturday, October 13, 2018

2008, 2009, 2010 Chevrolet Express Keyless Remote Programming Instructions

This keyless remote programming instructions work for L,U,P remote with part # 15913420, 20952475, 20869056, 22936099, FCC id OUC60270, OUC60221 on the back of it.

Replacement Remote 5913420, 20952475, 20869056, 22936099, OUC60270, OUC60221
Replacement Remote
Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC)
Follow all steps below to program the remote.
1. Press the vehicle information button until PRESS (check) TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until the REMOTE KEY LEARNING ACTIVE is displayed.
3. Press and hold LOCK and UNLOCK on the remote simultaneously for 15 seconds. On vehicles with the memory recall seats, the first remote programmed will be driver 1 and the second will be driver 2 and so on. You'll hear a chrime which indicates the remote has been programmed.
4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK/OFF.

No comments:

Post a Comment

Share