Thursday, October 4, 2018

2007 Cadillac Srx Keyless Remote Programming Instructions

This keyless remote programming instructions work for 5B (RS,L,U,RG,P) remote with part # 15913415, 15857839, 25839476, 15916016, 20869963, 20869053, 20952477, 22756459 FCC id OUC60270, OUC60221, and part # 22936101, 22951509, 20952476 on the back of it.

Replacement Remote 15913415, 15857839, 25839476, 15916016, 20869963, 20869053, 20952477, 22756459, OUC60270, OUC60221, 22936101, 22951509, 20952476
Replacement Remote
NOTE: You can system can save/program up to 8 remotes in it's memory. Before we start programming put your key in the ignition and turn it to ON position. (Don't start the engine) so you can access the (DIC)
Follow all steps below to program the remote.
1. Press the vehicle information button until the "Press (check) to reprogram a remote" displays.
2. Press the set/reset button until the Remote Programming Active is displayed.
3. Press and hold both LOCK and UNLOCK on the remote at the same time for 15 seconds. For vehicles with the memory recall seats, first remote programmed will be driver 1 and the second will be driver 2 and so on. You'll hear a chrime which indicates the remote has been programmed.
4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK/OFF.

No comments:

Post a Comment