Wednesday, October 3, 2018

2007, 2008, 2009, 2010 Cadillac Escalade Keyless Remote Programming Instructions

This keyless remote programming instructions work for L,U,P remote with part # 15913420, 20952475, 20869056, 22936099, FCC id OUC60270, OUC60221 on the back of it.

Replacement Remote 5913420, 20952475, 20869056, 22936099, OUC60270, OUC60221
Replacement Remote
Put the key in the ignition and turn it to ON position. (Don't start the engine) so you can access the (DIC)
Follow all steps below to program the remote.
1. Press the vehicle information button until the "Press (check) to reprogram a remote" displays.
2. Press the set/reset button until the Remote Programming Active is displayed.
3. Press and hold LOCK and UNLOCK on the remote simultaneously for 15 seconds. On vehicles with the memory recall seats, the first remote programmed will be driver 1 and the second will be driver 2 and so on. You'll hear a chrime which indicates the remote has been programmed.
4. If you're programming another (a maximum of 8) remote just go back to step 3.
5. To turn the programming mode off just twist the key to Lock then back to Off position in the ignition.

No comments:

Post a Comment

Share