Saturday, October 13, 2018

2007, 2008, 2009 Chevrolet Equinox Keyless Remote Programming Instructions

This keyless remote programming instructions work for RS,L,U,P remote with part # 20868672, 20952474, 15913421, 20868672, 22759546, 22936098, 25771045, 15857837, FCC id OUC60270 on the back of it.

Replacement Remote 20868672, 20952474, 15913421, 20868672, 22759546, 22936098, 25771045, 15857837, OUC60270
Replacement Remote
1. Make sure the vehicle is in PARK (P).
2. Press the vehicle information button until LEARN REMOTE KEY PRESS CHECK TO BEGIN displays.
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed.
4. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. A chime will sound indicating that the transmitter is matched.
5. To match additional transmitter at this time repeat Step 3. Each vehicle can have a maximum of four transmitter matched to it.

6. To exit the programming mode, you must cycle the key to LOCK/OFF 

No comments:

Post a Comment

Share