Wednesday, October 3, 2018

2006, 2007 Cadillac Dts Keyless Remote Programming Instructions

This keyless remote programming instructions work for L,U,T,P,RS remote with part # 20935331, 10337867, 15859331, 15912860, 20833562 FCC id OUC60270, OUC60221 on the back of it.

Replacement Remote 20935331, 10337867, 15859331, 15912860, 20833562, OUC60270, OUC60221
Replacement Remote
Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC)
Follow all steps below to program the remote.
1. Press the vehicle information button until the "Press (check) to reprogram a remote" displays.
2. Press the set/reset button until the Remote Programming Active is displayed.
3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with the memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
4. If you're programming another (a maximum of 8) remote just go back to step 3.
5. To turn the programming mode off just twist the key to Lock then back to Off position in the ignition.

No comments:

Post a Comment

Share