Thursday, October 4, 2018

2001, 2002, 2003, 2004, 2005 Chevrolet Venture Keyless Remote Programming Instructions

This keyless remote programming instructions work for 3B L,U,P remote with part # 10335583, 10335582-88, OR 9364556-4575, FCC id L2C0007T on the back of it.

Replacement Remote 10335583, 10335582-88, 9364556-4575, L2C0007T
Replacement Remote
1. No key in the ignition.
2. Take off the “BCM PRGRM” fuse from the fuse panel, you can find it by opening the front passenger door. Use the legend on the fuse panel to look for the “BCMPRGRM”
fuse properly.
3. Close all the doors of the vehicle then close the lifgate.
4. Put the key in the ignition and turn to ACC (Do not start the engine).
5. Turn the ignition OFF and back to ACC. (Fast)
6. Open and close any door. You'll hear a chime when the system enters programming mode.
7. Press and hold LOCK and UNLOCK buttons on your remote at the same time for 14 seconds. After 7 seconds, you'll hear a chime which indicates the remote has been successfully programmed. Then wait approximately 14 seconds for another chime.
8. Repeat step 8 to program another remote.
9. Take the key off from the ignition.
10. Put the “BCM PRGRM” fuse back.

No comments:

Post a Comment

Share