Thursday, October 4, 2018

1997, 1998, 1999, 2000 Chevrolet Venture Keyless Remote Programming Instructions

This keyless remote programming instructions work for l,u,psd remote with part # 10245951, FCC id ABO0204T on the back of it.

Replacement Remote 10245951,10245951
Replacement Remote
1. No key in the ignition.
2. Take off the “BCM PRGRM” fuse from the fuse panel, you can find it by opening the front passenger door. Use the legend on the fuse panel to look for the “BCMPRGRM” fuse properly.
3. Close all the doors.
4. Close the liftgate.
5. Put the key in the ignitionand turn it to ACC (one click towards you – the opposite direction from starting the engine).
6. Turn the ignition to OFF, and then quickly back to ACC.
7. Open and close any door. You'll hear a chime when the system enters programming mode.
8. Press and hold the LOCK and UNLOCK buttons on the remote at the same time for 14 seconds. IMPORTANT: After 7 seconds, you'll hear a chimme which indicates the remote has been successfully programmed. Then wait approximately 14 seconds for another chime. Your new remote has been programmed but all existing remote codes have been erased.
9. Go back to step 8 for programming another remote.
10. Remove key.
11. Put the “BCM PRGRM” fuse back into the fuse panel.

No comments:

Post a Comment

Share