Wednesday, October 31, 2018

1996, 1997, 1998 Acura TL Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # 72147-SZ5-A01, FCC id KOBUTA1T on the back of it.

Replacement Remote 72147-SZ5-A01, KOBUTA1T
Replacement Remote
IMPORTANT: Entering programming mode cancels all learned remote codes, so none of the previously programmed remotes will work. You must program all remotes at this time.

1. Open the driver’s door.
2. Press and hold the driver’s power door lock switch in the UNLOCK position.
3. Within 10 seconds insert the key in the ignition and remove it 5 times, then insert the key and leave it in the ignition. Check that the power door locks cycle to confirm that the system is in programming mode.
4. Press the LOCK or UNLOCK button on the remote. Check that the power door locks (except the driver’s) cycle to confirm that the remote’s code has been accepted.
5. To program a second remote repeat the last step for the second remote.
6. Release the power door lock button on the driver door to exit programming mode.

No comments:

Post a Comment

Share