This keyless remote programming instructions work for L,U remote with part # FCC id GQ43VT7T, GQ43VT4T, and part # TRW 3165189 on the back of it.
1. Look for the Program Connector near the keyless entry system. The Program Connector is a white plastic connector with two terminals which are not plugged to anything.
2. Use a jumper wire to connect the two program connector terminals. The system will cycle all door locks (lock and unlock) or you'll hear a chirp. This means your system is no in programming mode.
4. Repeat step 3 for the second transmitter (if any).
5. Remove the jumper wire from the connector.