Saturday, October 27, 2018

1993, 1994, 1995, 1996 Chevrolet Caprice Wagon Keyless Remote Programming Instructions

This keyless remote programming instructions work for 3B remote with part # 88959920, 10205241, 10205239, 10205240, 12522338, 10063533, 10205239, 12522337, 12522339, 12522356, 10097895, 10097894, 10205674, 10092854, 10097894, 10063534, 10178738, FCC id ABO0103T, GQ43VT1, ABO0104T, ABO0116T on the back of it.

Replacement Remote 88959920, 10205241, 10205239, 10205240, 12522338, 10063533, 10205239, 12522337, 12522339, 12522356, 10097895, 10097894, 10205674, 10092854, 10097894, 10063534, 10178738, ABO0103T, GQ43VT1, ABO0104T, ABO0116T
Replacement Remote
1. Locate the Data Link Connector (DLC) Underneath the drive'r side dashboard. Use diagram to the right as a map for your DLC  (they usually aren't letterd). The view in the picture is looking straight into the cavities of the DLC.
2. Ground pin G on the Data Link Connector (DLC) with suitable electrical wire. Receiver will respond by locking and unlocking doors  within 2 seconds

3. Press any button of the remote. Door locks will cycle and rear window release will be activated.
4. To program another remote just press any buttons on it as well then, doors will cycle and rear window release activates.
5. Remove the Gound pin G and your system will exit programming mode.

No comments:

Post a Comment

Share