Monday, October 15, 2018

1990, 1991 Oldsmobile Cutlass Calais Keyless Remote Programming Instructions

This keyless remote programming instructions work for 3B remote with part # 88959920, 10205241, 10205239, 10205240, 12522338, 10063533, 10205239, 12522337, 12522339, 12522356, 10097895, 10097894, 10205674, 10092854, 10097894, 10063534, 10178738, FCC id ABO0103T, GQ43VT1, ABO0104T, ABO0116T, and part # 218 K1200 on the back of it.

Replacement Remote 88959920, 10205241, 10205239, 10205240, 12522338, 10063533, 10205239, 12522337, 12522339, 12522356, 10097895, 10097894, 10205674, 10092854, 10097894, 10063534, 10178738, ABO0103T, GQ43VT1, ABO0104T, ABO0116T
Replacement Remote
ATTENTION: Programming a new remote will delete your existing remote codes from the system's memory. REprogram them after the new one.

1. Find the Programming Connector in the passenger side trunk. It's a plastic connector with one wire leading to it. You may also have to pull the back the trim to access the connector.
2. The programming connector should have one terminal. Ground this terminal to the trunk hatch or antenna. Door locks should cycle (lock and unlock) indicating your system is in programming mode. Do not remote the ground wire until step 5.
3. Press any button on the remote once. The door locks will cycle once. That remote has been accepted and all previous remotes have been erased.
4. If a second remote is to be programmed, press any button on that remote. The door locks will cycle.
5. Remove ground of programming terminal.

No comments:

Post a Comment

Share