Thursday, September 27, 2018

2003, 2004, 2005, 2006 Chevrolet Avalanche Keyless Remote Programming Instructions

This keyless remote programming instructions work for  remote with part # 15186203, 21997127, 15186200 #1, 15186201 #2, 15132197 #1, 15132198 #2, 10377295, 22730827 and FCC id LHJ011 on the back of it.

Replacement Remote 15186203, 21997127, 15186200, 15186201, 15132197, 15132198, 10377295, 22730827, LHJ011
Replacement Remote
Attention: Your system will delete every remote's code in it's memory once you've entered the programming mode. So, make sure to reprogram all of your old/existing remotes after dealing with the new one.

1. Close all vehicle doors, windows closed, wait for dome light to go off.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold  down until instructed to release in step 9.
4. Do steps 5 through 8 in fairly rapid succession.
5. Twist the key in the ignition to ON position (Don't start the engine)
6. Twist the key in the ignition back to OFF.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and  unlock the doors automatically.
10. Press and hold the LOCK and UNLOCK buttons on the remote at the same time until the door locks cycle. This step may take up to 30 seconds.
11. To program another remote just go back and re-do step 10.
12. To turn the programming mode OFF just turn the key in the ignition back to ON position.

No comments:

Post a Comment

Share