This keyless remote programming instruction works on this remote with part # 04602260AA, 04602260AD, and FCC id GQ43VT17T
2. Turn ignition to the RUN position (as far as you can go without cranking the engine). Wait for chimes to stop.
3. Using the working (programmed) transmitter, press and hold the UNLOCK button on the transmitter for between 4 and 10 seconds.
simultaneously then press and release just the UNLOCK button) for each new transmitter you wish to program. A chime will sound after each additional transmitter is programmed.
7. Test each transmitter for function.
Troubleshooting: If, at the “press and release just the UNLOCK button” in the second line at step 5, the
door locks unlock instead of give you a chime then you need to reverse steps 1 and 2.