Wednesday, September 19, 2018

2001, 2002, 2003 Dodge Grand Caravan Keyless Remote Programming Instructions

This keyless remote programming instruction works on this 6B remote with part # 04686797AB, 04686797AA and FCC id GQ43VT18T

Replacement Remote 04686797AB, 04686797AA, GQ43VT18T
Replacement Remote
These steps will work with the 6 button remote only.

1. Press the LOCK button 5 times on any working (programmed) remote at 2 second intervals to resynchronize.
2. Turn the ignition to the RUN position (Don't start the engine). Wait for chimes to stop.
3. Using the working (programmed) remote, press and hold the UNLOCK button on for between 4 and 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and press the PANIC button (on the existing programmed remote) for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
5. Within 30 seconds of chime, press the LOCK and UNLOCK buttons at the same time then press and release just the UNLOCK button on the SAME remote. A chime will sound indicating the remote has been re-programmed. Repeat this step (press and release the LOCK and UNLOCK buttons at the same time then press and release just the UNLOCK button) for each new transmitter you wish to program. A chime will sound after each additional remote is programmed.
6. Turn the ignition to OFF position, remove the keys to exit from programming mode.
7. Test each remotes function to make sure. 

TROUBLESHOOTING: If, the door locks unlock instead of giving you a chime at the “press and release just the UNLOCK button” in the second line at step 5, then you need to reverse steps 1 and 2.

No comments:

Post a Comment