Wednesday, September 19, 2018

1999, 2000, 2001, 2002, 2003 Dodge Grand Caravan Keyless Remote Programming Instructions

This keyless remote programming instruction works on this 3B remote with part # 04686481, 04686481AB, 04686481AC, 56049249AA, 04686481AF, and FCC id GQ43VT13T, GQ43VT17T

Replacement Remote 04686481, 04686481AB, 04686481AC, 56049249AA, 04686481AF, and FCC id GQ43VT13T, GQ43VT17T
Replacement Remote
1. Press the LOCK button 5 times on the existing (programmed) remote with 2 second intervals to resynchronize.
2. Turn the ignition to RUN position (Don't start the engine). Wait for chimes to stop.
3. Using the working (programmed) remote, press and hold the UNLOCK button on for between 4 and 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and press the PANIC button (on the existing programmed remote) for 1 second and release both buttons. A chime will sound to indicate that the programming mode has been entered (allow 3 seconds for chime to sound).
5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button on the SAME transmitter. A chime will sound indicating the transmitter has been re-programmed. Repeat this step (press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button) for each new
transmitter you wish to program. A chime will sound after each additional
transmitter is programmed.
6. Turn the ignition to OFF position and remove the keys to exit from programming mode.
7. Test each remotes function to make sure.
NOTE: If, at the “press and release just the UNLOCK button” in the second line
at step 5, the door locks unlock instead of giving you a chime then you need to reverse
steps 1 and 2.

No comments:

Post a Comment

Share