Wednesday, September 19, 2018

1999, 2000, 2001, 2002 Dodge Ram Pickup Keyless Remote Programming Instructions

This keyless remote programming instruction works on this remote with part # 56045497AA, 56045497AB, 56045497AC, and FCC id GQ43VT9T

Replacement Remote 56045497AA, 56045497AB, 56045497AC, GQ43VT9T
Replacement Remote
1. Twist the key in the ignition to ON and make sure you didn't start the engine.
Then wait for chimes to stop.
2. Press the UNLOCK button for 4 to 10 seconds keep on pressing the existing (working) remote.

3. Within that 4 to 10 seconds from step 2, continue pressing the UNLOCK then  press PANIC for 1 second and release both buttons. A chime will sound indicating that you're now in programming mode.
4. Within 30 seconds press any button on all remotes to be programmed
including existing (programmed) remotes. A chime sounds for each remotes you're programming.
5. Turn the ignition OFF position to end the programming mode.

No comments:

Post a Comment

Share