Wednesday, September 19, 2018

1999, 2000 Dodge Durango Keyless Remote Programming Instructions

This keyless remote programming instruction works on this remote with part # 56045497AA, 56045497AB, 56045497AC, and FCC id GQ43VT9T

Replacement Remote 56045497AA, 56045497AB, 56045497AC, and FCC id GQ43VT9T
Replacement Remote
1. Turn ignition to RUN, don't start the engine. And wait for chimes to stop.
2. Using any existing (working) remote, press the UNLOCK button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and
press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (give 3 seconds for chime to sound).
4. Within 30 seconds press any button on all remotes to be programmed including previously programmed remotes. A chime sounds after each remote is programmed.
5. Turn OFF the ignition.

No comments:

Post a Comment

Share