Wednesday, September 19, 2018

1998, 1999, 2000, 2001, 2002, 2003 Lincoln Town Car Keyless Remote Programming Instructions

This keyless remote programming instruction works on this 4B remote with part # 8L3Z-15K601-B, 8L3Z-15K601-AA, 8L3T-15K601-AA, F8DB-15K601-AA, 2L3T-15K601-AA, 2L3T-15K601-AB, and FCC id GQ43VT11T, CWTWB1U322, CWTWB1U331, CWTWB1U345

Replacement Remote 8L3Z-15K601-B, 8L3Z-15K601-AA, 8L3T-15K601-AA, F8DB-15K601-AA, 2L3T-15K601-AA, 2L3T-15K601-AB, GQ43VT11T, CWTWB1U322, CWTWB1U331, CWTWB1U345
Replacement Remote
1. Cycle the ignition from OFF to RUN (as far as you can go without cranking the engine) four times within 3 seconds, ending in the RUN position. The locks will then lock and unlock automatically, confirming program mode has been entered.
2. Press ANY button on the transmitter to be programmed. NOTE: When the signal from the remote transmitter is accepted by the vehicle, the LED will flash. When the first keyless entry transmitter is programmed, all existing keyless entry remote transmitters  are erased.
3. If additional keyless entry remote transmitters are to be programmed (including the existing remotes), repeat step 2 within 5 seconds.
4. To exit program mode, turn the ignition to OFF or wait 10 seconds.

No comments:

Post a Comment

Share