Monday, September 17, 2018

1991, 1992, 1993 Chrysler Imperial Keyless Remote Programming Instructions

This keyless remote programming instructions work to this remote with part # 04688527, 04759136AB, 04759136, 04469341 AB, 04469341 with FCC id GQ43VT5TGQ43VT7T.

Replacement Remote 04688527, 04759136AB, 04759136, 04469341AB, 04469341, GQ43VT5T, GQ43VT7T
Replacement Remote
1. Look for the keyless entry program line – a dark green wire with a molded plastic insulator on the end. The program line is located under the left side of the instrument panel. The wire is taped back to the harness (left of the steering column near the floor) and terminated with a black rubber mold.
2. Connect the program line from the Remote Keyless Entry Module to ground with a jumper wire.
3. Put the key in ignition and turn it to ON position.
4. Press any button on the remote to be programmed. If there is another remote to be programmed just press a button on that remote. The locks will cycle each time a remote is added.
5. Disconnect the programming line from ground, turn ignition off and remove the key.

No comments:

Post a Comment

Share