Share

Wednesday, August 1, 2018

2005, 2006, 2007, 2008, 2009, 2010 HONDA ODYSSEY Keyless Remote Programming Instructions

This keyless remote programming instructions work for L,U,PSD,PSD,P remote with part # 72147-SHJ-A21 FCC id OUCG8D-399H-A and part # G8D-399H-A on the back of it.

CONSIDER: Once you're on programming mode your car's system will reset and you may need to reprogram your other remotes that are already paired to it. Separate your key and remote from your keychain.

1. You should use your key in your right and remote in your left hand. Then insert your key to the ignition.
2. Perform these steps within 5 seconds each:
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on your remote and the car door should lock and unlock. Now your remote and the system are married.
6. If you have another remote to program, just repeat the step 5.
7. Once you're done programming, turn the key back to LOCK position and remove it.

No comments:

Post a Comment