Share

Wednesday, August 1, 2018

2009, 2010 HONDA ODYSSEY Keyless Remote Programming Instructions

This keyless remote programming instructions work for LG & no mem remote with part # 72147-SHJ-X61 FCC id OUCG8D-399H-A ? and part # on the back of it.

NOTE: While on programming mode, your system will reset and you will need to reprogram your existing remotes. First, you need to remove your key and remote from the keychain.

1. To make your life easier use your key in your right hand and remote in your left hand. After that, insert your key to the ignition.
2. Perform these steps within 5 seconds:
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition ON.
4. Press the UNLOCK button on your remote. The door will lock and unlock to verify the system is in programming mode.
5. In 10 seconds, press the UNLOCK button on your remote. If the door locks and unlock it means your remote paired to the system. 
6. Do step 5 if you want to program another remote.
7. Turn the key back to LOCK and remove it. Now, the system will know you're done.

No comments:

Post a Comment