Share

Wednesday, August 1, 2018

2005, 2006, 2007, 2008, 2009, 2010 HONDA ODYSSEY Keyless Remote Programming Instructions

This keyless remote programming instructions work for #2 & LG remote with part # 72147-SHJ-A71 FCC id OUCG8D-399H-A and part # G8D-399H-A on the back of it.

NOTE: While on programming mode, your system will reset and you will need to reprogram your existing remotes. First, you need to remove your key and remote from the keychain.

1. To make your life easier use your key in your right hand and remote in your left hand. After that, insert your key to the ignition.
2. Now, do these steps 3 times in 15 seconds:
a. Turn the ignition to ON position and you'll notice panel lights will turn on. But you don't need to start the engine.
b. Press the UNLOCK button on your remote.
c. Turn the ignition to LOCK and leave the key.
3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. In 10 seconds, press the UNLOCK button on your remote. If the door locks and unlock it means your remote paired to the system. 
6. Do step 5 if you want to program another remote.
7. Turn the key back to LOCK and remove it. Now, the system will know you're done.

No comments:

Post a Comment