Share

Wednesday, August 1, 2018

2005, 2006, 2007, 2008, 2009, 2010 HONDA ODYSSEY Keyless Remote Programming Instructions

This keyless remote programming instructions work for #1 & LG remote with part # 72147-SHJ-A61 FCC id OUCG8D-399H-A and part # G8D-399H-A on the back of it.

NOTE: While on programming mode, your system will reset and you will need to reprogram your existing remotes. First, you need to remove your key and remote from the keychain.

1. To make your life easier use your key in your right hand and remote in your left hand. After that, insert your key to the ignition.
2. Perform the steps below 3 times within 15 seconds:
a. Turn your ignition to ON postion and panel lights will turn ON. (Never start the engine).
b. Press the UNLOCK button on your remote.
c. Turn your ignition to LOCK position and leave the key.
3. Within 5 seconds turn the ignition to the ON position.
4. On the remote press the UNLOCK button and your car's door should lock and unlock. It means you're in programming mode.
5. In 10 seconds, press the UNLOCK button on your remote. If the door locks and unlock it means your remote paired to the system. 
6. Do step 5 if you want to program another remote.
7. Turn the key back to LOCK and remove it. Now, the system will know you're done.

No comments:

Post a Comment