Share

Wednesday, August 1, 2018

1999, 2000, 2001 HONDA PRELUDE Keyless Remote Programming Instructions

This keyless remote programming instructions work for l,u remote with part # 72147-S30-A01 FCC id CWT72147KA3 and part # on the back of it.

CONSIDER: Once you're on programming mode your car's system will reset and you may need to reprogram your other remotes that are already paired to it. Separate your key and remote from your keychain.

1. You should use your key in your right and remote in your left hand. Then insert your key to the ignition.
2. Perform these steps within 5 seconds:
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition ON.
4. Press the UNLOCK button on your remote. The door will lock and unlock to verify the system is in programming mode.
5. In 10 seconds, press the UNLOCK button on your remote. If the door locks and unlock it means your remote paired to the system. 
6. Do step 5 if you want to program another remote.
7. Turn the key back to LOCK and remove it. Now, the system will know you're done.

No comments:

Post a Comment