Share

Monday, July 30, 2018

2001, 2002, 2003, 2004, 2005, 2006 ACURA MDX Keyless Remote Programming Instructions

This keyless remote programming instructions work for #1 3B remote with part # 72147-S3V-A13,72147-S3V-A23 FCC id E4EG8D-444H-A and part # G8D-444H-A on the back of it.



IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously
programmed remotes will work. You must program all remotes, including existing ones now.
Separate your ignition key from remotes on keychain.

1. Start with your key in your right hand and any remote in your left hand. Keep all additional
remotes easily accessible to your left hand. Insert the key into the ignition.

2. Perform these steps within 5 seconds:

a. Turn the ignition to the ON position (where the instrument panel lights are turned
on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave
the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned
on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave
the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned
on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave
the key in the ignition.
3. Within 5 seconds turn the ignition to ON.

4. Press the UNLOCK button on the same remote and release. The power door locks will
cycle to confirm the system is in programming mode.
5. In 10 seconds, press the UNLOCK button on your remote. If the door locks and unlock it
means your remote paired to the system.

6. Do step 5 if you want to program another remote.

7. Turn the key back to LOCK and remove it. Now, the system will know you're done.

No comments:

Post a Comment