Share

Tuesday, July 31, 2018

2008, 2009, 2010, 2011, 2012 HONDA ACCORD Keyless Remote Programming Instructions

This keyless remote programming instructions work for RHK 08-12 Accord 2door remote with part # 35118-TE0-A10 FCC id MLBHLIK-1T and part # L on blade on the back of it.

IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.

1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Now, do these steps 3 times in 15 seconds:
a. Turn the ignition to ON position and you'll notice panel lights will turn on. But you don't need to start the engine.
b. Press the UNLOCK button on your remote.
c. Turn the ignition to LOCK and leave the key.
3. In 5 seconds turn your ignition to ON position.
4. On your remote, press the UNLOCK button. Then the door will lock and unlock which means the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on your remote and the car door should lock and unlock. Now your remote and the system are married.
6. If you have another remote to program, just repeat the step 5.
7. Once you're done programming, turn the key back to LOCK position and remove it.

No comments:

Post a Comment