Share

Tuesday, July 31, 2018

1996, 1997 HONDA DEL SOL Keyless Remote Programming Instructions

This keyless remote programming instructions work for OPTION remote with part # 39950-S01-A01 08E61-S01-100 cheap FCC id A269ZUA101 and part # on the back of it.

IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.

1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Now, do these steps 3 times in 15 seconds:
a. Turn the ignition to ON position and you'll notice panel lights will turn on. But you don't need to start the engine.
b. Press the UNLOCK button on your remote.
c. Turn the ignition to LOCK and leave the key.
3. In 5 seconds turn the ignition to the ON position.
4. On the remote press the UNLOCK button and your car's door should lock and unlock. It means you're in programming mode.
5. In 10 seconds press the UNLOCK button on the same remote. The door will lock and unlock to indicate that the system accepted your remote.
6. Repeat step 5 to program other remotes.
7. Turn your key back to LOCK and remove it from the ignition. This indicates that you're done programming your remotes.

No comments:

Post a Comment