Share

Monday, July 30, 2018

1996, 1997, 1998, 1999, 2000, 2001 ACURA RL Keyless Remote Programming Instructions

This keyless remote programming instructions work for L,U,T,P remote with part # 72147-SZ3-A02 FCC id CWT72147KA.




CONSIDER: Once you're on programming mode your car's system will reset and you may 
need to reprogram your other remotes that are already paired to it.
Separate your key and remote from your keychain.

1. You should use your key in your right and remote in your left hand. Then insert your key to
the ignition.

2. Perform the steps below 3 times within 5 seconds:

a. Turn your ignition to ON postion and panel lights will turn ON. (Never start the engine).
b. Press the UNLOCK button on your remote.
c. Turn your ignition to LOCK position and leave the key.
3. In 5 seconds turn your ignition to ON position.

4. On your remote, press the UNLOCK button. Then the door will lock and unlock which
means the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The
door locks will cycle to confirm that the system accepted this remote.

6. Repeat step 5 for second or third remotes.

7. Turn the key back to LOCK and remove from ignition to exit programming mode.

No comments:

Post a Comment