|Factory Remote - get one here|
The whole programming process has to be completed within Thirty seconds of grounding VAC reprogramming connector (step 2). If the procedure isn't completed then start over at step 1.
1. Turn the ignition to ON.
2. Look in the trunk beneath the rear shelf between the place that the speakers are mounted. Ground the green single wire VAC connector located at the keyless entry receiver module (see diagram).
3. Wait for door locks to lock and unlock on their own indicating you have entered programming mode.
4. Push UNLOCK on remote 1 twice (pause one second between presses.)
5. Wait for door locks to lock and unlock automatically.
6. Repeat step 4 through 5 for remote 2.
7. Remove ground wire from green connector.
Trouble-shooting: In the event the receiver isn't found on the back shelf then look for it inside the trunk just over the left wheelwell.
Battery for this remote | Cover to protect remote
Relevant Part numbers: ABO0502T, GLQ9Z6-1507, 22100943, 22100944, 22100945, 22110689, 22100951